SPEED FEED 400 NYLON HEAD 10 x 1mm Stihl 10 x 1.25mm Husqvarna etc..

Speed Feed 400, Nylon Head Suit Stihl, Husqvarna

This auction is for a new aftermarket SPEED FEED nylon BUMP feed head for the following Stihl FS Trimmers FS55, FS80, FS85, FS90, FS110, FS130, FS94, FS131, FS120, FS200, FS250 also fits all the KM type attachments.

Also fits Husqvarna Trimmers with a 10mm x 1.25mm thread.

This auction is for ONE complete SPEED FEED NYLON HEAD with the following adapters.

M10 x 1mm female adapter. Stihl
M10 x 1.25mm female adapter some smaller Husqvarna models
Stud 8mm x 10.25mm some Shindaiwa
Stud 10.25mm to 10.25mm double ended male adapter
Black plastic spacer washer

Will come with the 10.25mm adapter fitted, so if fitting to Stihl just change it over or I can do it if you let me know.

PLEASE NOTE: If you find the head to sensitive you will need to mount the black plastic blade washer above the head this helps a lot on the Stihl machines.

The awesome thing about these heads is you don’t have to pull them apart to fill them with line, you just twist the bottom part of the head until the FEED arrows line up, then feed one big length of line through (about 3-4 metres) pull through so there is and even amount of line on both sides then just wind the head up and it pulls all the line in at the same time, then just TAP and GO.

I can load this type of head in less than a minute, hence SPEED FEED name.

The Stihl adapter is 10mm x 1mm left hand thread, suits Stihl FS44, FS55, FS85, FS90, FS110, FS130, FS120, FS200, FS250 etc… can also do an adapter for the bigger machines that run a 12mm thread, and have left hand taps for all sizes, so can make this head fit anything!

Any Questions just ask.


31.14$ (USD)

1 in stock

Categories: ,

Can't quite find what you are looking for?
Contact us to see if we can supply what you need.

Website by